Rental Configurations; Choice Of Application Configuration - SDMO R 340 U User And Maintenance Manual

6.3.7 Rental configurations

6.3.7.1.

Choice of application configuration

Solo generating set Without inverter (A612)
1. Turn off the battery isolator switch.
2. Check that the emergency stop buttons are activated.
3. Press the "STOP" button on the KERYS.
4. Turn the changeover switch to position 1.
1: SOLO GENERATING SET WITHOUT GRID COUPLING
APPLICATION: A612
2: PRODUCTION POWER PLANT WITHOUT GRID COUPLING
APPLICATION: A632 / A633
3: NOT APPLICABLE
4 : SOLO GENERATING SET WITH GRID COUPLING
APPLICATION: A651
15/07/09 19:10 :00
A612: Single Genset without N/E
Mains supply detection using the adjustment card
Mains supply detection using an external contact
(If the switch is already set to " 1 ", turn the switch and return to position '' 1 '')
After changeover, the screen below appears.
GS 1 Rental application
Validation
93/285
1
4
3
Stop Faults
2
Alarms