Switching Off; Alarms And Faults; Viewing Alarms And Faults - SDMO R 340 U User And Maintenance Manual

6.2.3 Switching off

Open the circuit breaker
manually
The following display will disappear (supply stopped)
Press the STOP button
The following screen is displayed and the generating set will stop
OFF
IN PROGRESS
24/08/2005
Switch TELYS off by turning the key to "OFF" (without forcing it to the "OFF" position).

6.2.4 Alarms and faults

6.2.4.1.

Viewing alarms and faults

Alarms and faults are displayed as follows:
Alarms
All alarms will cause:
the yellow LED to flash "General alarm".
In conjunction with this LED:
a flashing pictogram appears on the LCD screen
representing the circuit affected by the alarm and the
associated indicator, if present
(example)
Faults
All faults will cause:
the generating set to stop: immediate or gradual stop (coolant temperature and overload or short circuit)
the red LED to flash "General fault".
OR
13:12
by selecting menu 12 "CONTROL LOAD"
message on graphic display (example)
Low Fuel Level
25/12/05
48/285
FAULT
ALARM
15:30
OK=HELP