SDMO R 340 U User And Maintenance Manual page 90

When an access code of a sufficient level is validated this screen also allows:
Setting of the module synchronisation time
Selection of the logo displayed on the Kerys home screen.
When the time setting by the SNTP protocol is not active the screen looks like this.
15/07/09 19 :10 :00
Français
Inhibit the keys
- 1 -
Identification
application
In this case the transmission of a signal to the bus, enabling the different real time clocks to be reset, is defined by the
synchronisation time.
Pressing the "KOHLER home logo" key alters the appearance of the home screen by replacing the KOHLER logo with the SDMO
logo as default. The home screen then looks like this:
15/07/09 19 :10 :00
- 1 -
Operation
GS 1 Regional parameters
English Espanol
Day Month Year
22 10
SDMO welcome logo
- 2 -
Software versions
GS 1
- 2 -
Fault finding
- 3 -
Archiving/Metering
Deutsch Portugues
hours Minutes
07 17
KOHLER welcome logo
- 3 -
Printing
Welcome
- 4 -
Maintenance
88/285
Stop Faults Alarms
Language
option
Seconds
10 00
Auto Faults Alarms
- 6 -
System
- 5 -
Configuration