Fuel And Consumables; Specifications; Oil Grades - SDMO R 340 U User And Maintenance Manual

2.3.

Fuel and consumables

All specifications (product features) are given in the motor and alternator maintenance manuals attached to this manual.
In addition, we recommend the consumables to be used in the "specifications" section.

2.3.1 Specifications

2.3.1.1.

Oil grades

Engine
Make
John Deere
MITSUBISHI
Volvo
GENLUB TDX 15W-40
Top-of-the-range lubricant recommended for diesel engines: for generating sets used under severe conditions.
USES:
Particularly suited to more modern engines with or without turbochargers, intercoolers, or sophisticated injection systems
(e.g. HEUI, injector-pumps).
All types of use: can cope with the most demanding applications.
Depolluted engines: complies with EURO 2 and EURO 3 technology and can be used with all types of diesel fuel,
especially ecological diesel with low sulphur content.
PERFORMANCE:
ACEA E3
API CH-4
Meets level E3 of the specifications defined by European manufacturers in the ACEA standards 98 edition.
ADVANTAGES:
Less frequent oil services: this product has been put to the test during thousands of hours of use on worksites under
varying conditions, demonstrating its high quality.
Conformity with new environmental legislation: adherence to new anti-pollution standards required for new EURO 2
and EURO 3 engines.
SPECIFICATIONS:
SAE Grade
Density at 15°C
Cinematic viscosity at 40 °C
Cinematic viscosity at 100 °C
Viscosity index
Dynamic viscosity at -15 °C
Pour point
Flash point
Sulphated ash content
(Values given as examples only)
Type
John Deere
All
GenPARTS
All GenPARTS
All GenPARTS
15W-40
0.883
105
14.1
140
3000
- 30
220
1.4
19/285
Oil
Make
mm2/s (cSt)
mm2/s (cSt)
mPa.s(cP)
°C
°C
% weight
Type
John Deere PLUS-50
GENLUB TDX 15W40
GENLUB TDX 15W40
GENLUB TDX 15W40