Primary Sheave And V-Belt - Yamaha XC200T Service Manual

Eoo,°0 o,sAssEooL [E°o " *'1
3. Remove:
. oPiston pin (_
oPiston (_)
NOTE:
Before removing the piston pin, deburr the clip
groove and pin holearea. If the piston pin groove
is deburred and piston pin is still difficult to re-
move, use Piston Pin Puller (YU-01304).
Do not use a hammer to drive the piston pin
out.
4. Remove:
oDowel pins (_
oNozzle (_) with O-ring (_
eGasket (Cylinder) (_)
5. Remove:
.... oValve lifter (Intake _ and Exhaust (_)
NOTE:
Put marks on them so that they can be identified
as "intake" and "exhaust".
..... PRIMARY SHEAVE AND V=BELT
1. Remove:
oSheave case cover (_
NOTE:
Working in a crisscross pattern, loosen screw 1/4
turn each. Remove them after all are loosened.
3-8