Yamaha XC200T Service Manual page 119

E°O,OE MOLY A°O AOJ0STOEO [E°O ]
Bolts (Cylinder Head): . 22 Nm (2.2 rn,kg, 16 ft,lb)
Socket Bolt (Cylinder):
10 Nrn (1.0 m,kg, 7.2 ft_lb)
Socket Bolt (Cylinder Head):
22 Nm (2.2 mokg, 16 ft°lb)
NOTE:
Thightenthe boltsin two stage, usinga crisscross
pattern.
4. Align the "T'" wark (_ on the flywheel
magneto (_ with the stationary pointer (_)
on the crankcase so that the piston is at TDC
. on the compression stroke.
5. Install:
oNozzle
eO-ring (New) @
oDowel pins (_)
oPush rods (_
........ NOTE:
Oil the push rod ends.
i !
6. Apply:
....... eQuick Gasket® (ACC=11001-05-01)
To the cylinder head cover mating surface.
i _ i _ _ i _i_i __i ii_!_ii_ _i_/_i
7. Install:
oCylinder head cover
NOTE: '
Make sure the push rod has correctly seated into
the rocker arm.
3-66