Carburetor Hoses; Connectors; Control Cables - Yamaha XC200T Service Manual

t
ENG L% _ ENG_NEREMOVAL
2. Loosen:
*Screw (Carburetor-clamp) _)
3 Remove:
*Air cleaner case assembly _
CARBURETOR HOSES
1. Dbconnect:
* Fuel feed hose _'}
*Vacuum hose (_$}
From fuel cock side.
CONNECTORS
1 Remove:
*Starter motor lead (Positive)
®Starter motor lead (Negative) ".2-}
o Band "3"}
2o Disconnect:
_AC magneto lead connecter (.!}
_Pickup coil lead connecter {_
*Choke unit lead coupler {3"}
®Oil level switch lead couple_ _4_
CONTROL CABLES
1. Loosen:
Looknut f Throttle cable adjuster} 0_'}
2. Remove:
*Throttle came {_
From carburetor side,
*Spark plug cap {3".
3_3