Yamaha XC200T Service Manual page 230

APPX
SPECmRCATIONS
TIGHTENING TORQUE
Part to be tightened Thread size Remarks
Front Wheel Axle M12
Front Brake Cam Lever M 6
Front Shock (Upper) M10
Front Shock (Lower) M 8
Torque Arm-Fork M10
Torque Arm-Shoe Plate M10
Front Arm Pivot M10
Handle M10
Steering Shaft M25
Engine Pivot Shaft M14
Rear Wheel Axle M14 1,
Rear Brake Cam Lever M 6 10
Rear Shock (Upper) M10 50
Rear Shock (Lower) M12 50
Wheel Hub M 8 30
Side Stand M10 30
Main Stand MI0 30
Rear Stay (Front) M 8 25
Rear Stay (Upper) M 8 20
Rear Stay (Lower) M 8 20
Steering Shaft Ring Nut
(Lower) M25 30 Refer to NOTE
3
Steering Shaft Ring Nut
(Upper) M25
Fuel tank (Front)
(Rear)
NOTE:
® Ring nut (lower):
1) First, tighten the ring nut approximately 50 Nm (5°0 mokg, 36 ftolb) by using he torque wrench,
then loosen the ring nut completely.
2) Retighten the ring nut 3 Nm (0.3 mokg, 2.2 ftolb).
H
7-13