Yamaha XC200T Service Manual page 241

APPX
CABLE ROUTmNQ
(_ Throttle cable [] Place the wire harness coupler, excluding the
(_ Main switch horn lead and left flasher light lead, to the right
..... (_ Starting circuit cut-off relay of the steering head pipe.
(_ Horn
(_ AC magneto generator lead [] Pass the fuel sender lead inside of the seat
(_) Starter motor positive lead bracket.
(_ Starter motor negative lead Do not pinch the lead.
(_) Fuel sender lead
(_ Clamp [] Clamp the wire harness, starter relay negative
(_ Battery negative lead lead and battery negative lead.
(_) Battery
(_ Ignition coil [] Fasten the battery negative lead so as to hang
(_) Spark plug lead downward.
[] Fasten the ignition coil negative lead facing to
the right.
7-24