Installing The Secondary Sheave, V-Belt And Primary Sheave - Yamaha YP400T, YP400V, YP400W Service Manual

3
1
3. Install:
• guide pin 1
4. Lubricate:
• guide pin groove 2
• O-ring 3
5. Install:
• spring seat
2
• compression spring
• clutch shoe assembly
• clutch shoe assembly nut 1
1
NOTE:
_
Attach the sheave spring compressor 2 and
sheave fixed block 3 onto the secondary
sheave assembly as shown. Then, compress
the spring, and tighten the clutch shoe assem-
bly nut.
EAS00325
INSTALLING THE SECONDARY SHEAVE,
V-BELT AND PRIMARY SHEAVE
1. Install:
• V-belt 1
• secondary sheave assembly 2
CAUTION:
_
Do not allow grease to contact the V-belt
2
and the secondary sheave assembly.
NOTE:
_
• Install the V-belt onto the primary sheave
side.
• Install the V-belt with the printed arrow mark
on the V-belt facing in the direction shown in
the illustration.
5 - 47
BELT DRIVE
New
(with the recommended lubricant)
Recommended lubricant
BEL-RAY assembly lube
Sheave spring compressor
90890-04134, YM-04134
Sheave fixed block
90890-04135, YM-04135
ENG