Installing The Secondary Sheave, V-Belt And Primary Sheave - Yamaha YW125Y 2009 Service Manual

4
3
1
1
2
3
5. Install:
8 secondary sheave 1
8 spring
2
8 clutch carrier 2
TIP
5
Attach the clutch spring holder 3 and clutch
spring holder arm 4 onto the secondary sheave
as shown. Then, compress the spring, and
tighten the clutch carrier nut 5.
EAS00325
INSTALLING THE SECONDARY SHEAVE, V-
BELT AND PRIMARY SHEAVE
1. Install:
8 V-belt 1
8 secondary sheave 2
2 NOTICE
Do not allow grease to contact the V-belt and
secondary sheave.
TIP
8 Install the V-belt onto the primary sheave
side.
8 Install the V-belt with printed arrow mark on
the V-belt facing in the direction shown in
the illustration.
2. Install:
8 clutch carrier nut 1
90Nm(9.0m • kgf, 65.1ft • lbf)
TIP
While holding the clutch carrier with the rotor
holding tool 2, tighten the clutch carrier nut with
1
the locknut wrench 3.
5-50
ENG
BELT DRIVE
Clutch spring holder
90890-01337 (YM-33285)