Yamaha XC200T Service Manual page 97

'OSPECT'OO A°O °EPA'° 1 Eoo
CRANKSHAFT, CONNECTING ROE) AND
CRANKCASE
_ 1. Thoroughly clean all parts.
o_:_ Crankshaft
1. Remove:
®Nuts (Rod cap) (_
®Rod cap (_
oConnecting rod
2. Inspect:
®Drive gear teeth (Balancer) (_
Pitting/Galling/Wear-_ Replace crankshaft
assembly.
oCrankshaft splines (_
Wear/Damage-_ Replace.
_ oCrankshaft journals
Pitting / Scratches--> Replace.
NI
3. Measure:
I(_) ._ )(_ oRounout:
\ Use the V-Blocks (_ and Dial Gauge (_.
Out of specification-_Replace.
I _ RounoutLirnit: ]
I 0.02 rnm (0.0_8 in)
® , ®
Crankshaft Main Bearing Clearance
Measurement
1. Measher:
oMain bearing clearance
3-44