Yamaha XC200T Service Manual page 169

ELECT.,C STA°T,°O SYSTEM lELEO 1
Disconnect the starter relay coupler, then con-
nects the "Blue/White" lead (_ to the battery
positive (+) lead (_) and "RedGreen" lead
(_ to the body earth (_); use a jumper lead
i
(_. __ If the starter motor does not run,
I
replace the starter relay.
. _l l _ __
Connect the "Red/White" lead @ to the
"Yellow" lead (_) on the starting circuit cut-
off relay coupler (_); use a jumper lead @.
If the starter motor does not run,
replace the starting circuit cut-off relay.
I;
i,f t he sta er motor runs. re0.acethed,o0eun't. U Ni
6-8