Yamaha XC200T Service Manual page 110

_NG %]DI ENGENE ASSEMBLY AND ADJUSTMENT
MAINBTAND AND REAR WHEEL
1. Install
oMainstand _)
oBolts (Mainstand) _
NOTE:
Grease the mainstand bolts:
2. Hook:
oSpdng (Mainstand _1_
3. Tighten:
®Bolts (Mainstand) (2}
{_-----[-Bo_t {Mlainstandl ¢:
30 Nm 13i0 m,kg; _ ft-lbl I
4. Instatl'
eBrake shoe plate _.3}
oBolts (Brake shoe plate) _2}
Brake shoes {4}
NOTE:
Grease the cam and pivot pin on the brake shoe
plate,
5. Tighten:
®Boks (Brake shoe plate) _
Bolt {Brake Shoe Plate} _:
18 Nm (1,8 kg, 13 ftomb)
LOCTITE ®
6. Install:
oThrust washer _)
®Rear wheel (j_
oNut (Rear wheel axle)
NOTE:
eGrease the thrust washer,
QDo not thighten the wheel axle nut at this point.
3°57