Flywheel Magneto And Starter Motor; Rear Wheel And Mainstand - Yamaha XC200T Service Manual

ENGUNEDnSASSEMBLY ENG
FLYWHEEL MAGNETO AND STARTER
.. MOTOR
1. Remove:
_Cooling fan
oFlange bolt (Flywheel magneto) (_
Use the Roter Holder (YU-01235) _.
2. Remove:
eFlywheel magneto (_
Use the Rotor Holder (YU-01235) (_ and
Flywheel Magneto Puller (YU-01080) (_).
3. Remove:
oStator assembly (_
oWoodruff key (_
eStarter motor (_)
REAR WHEEL AND IV]AINSTAND
1. Unhook:
eSpring (Mainstand) (_
2. Loosen:
®Bolts (Mainstand) (_)
NOTE:
Do not remove the bolts (Mainstand) yet.
3. Remove:
eNut (Rear wheel axle)
oRear wheel (_
oThrust washer (_
3-10