Installation - Yamaha XC200T Service Manual

C-HAS REAR WHEEL
4. Measure:
®Brake shoe (Thickness}
®Shoe spring free tengh
ngh:
:0mm i2'6a 1
eBrake drum inside diameter
Brake Drum Inside Diameter:
STD: 150 mm (5o91 in)
Limit: 151 mm (5og4 in)
Refer to "FRONT WHEELqNSPECTION"
section.
INSTALLATION
When installing the rear wheel, reverse the
removaJ procedure. Note the following points.
1. When installing the wear indicator _ to the
camshaft _), align the projection _ on the
wear indicator with the stot _4") on the
camshaft°
li "Jj__'} 2. AppJy:
*Camshaft (1_'_ ( Shaft and cam)
ePivot pin _ (Brake shoe)
eThrust washer (._
Lithium_soap
3_ Tighten:
oBrake cam lever (.__
oBotts (Brake shoe plate)
oNut (Rear wheel axle) {5}
/
_} _'_ Brake Cam Lever _4_:
10 BJm {1o0 mokg, 7.2 ftomb)
_4_ Bo_ts (Brake Shoe P_ate):
18 Nm {1o8 mokg, 13 fto_b)
LOCT_TE¢_
Rear Wheel Axle _5_:
100 Nm t10.0 mokg, 72 ftoUb)
5-11