Choke Relay Test - Yamaha XC200T Service Manual

AUTO CHOKE SYSTEM IELE ]
CHOKE UNBT TEST
1. Remove:
oCarburetor assembly
oChoke unit
From carburetor body.
Referto "CHAPTER 4. REMOVAL" section.
2. Measure:
eChoke unit resistance
Use the Pocket Tester (YU-03112).
Out of specification_ Replace.
Choke Unit Resistance:
3.0±1.0_ at 25°C (77°F)
3. Connect:
e12V Battery (_
4. Check:
. oCam movement
Incorrect movement_ Replace.
[] BATTERY IS NOT CONNECTED __,-_
(WAX IS COLD)
[] BATTERY IS CONNECTED
(WAX IS WARM)
CHOKE RELAY TEST
1. Remove:
eScooter panel
Refer to "REMOVING THE COVERS AND
PANELS" section.
2. Remove:
eChoke relay unit (_
6-54