Yamaha XC200T Service Manual page 153

I
_ 8
[] _ 4. Remove:
®Bolts (Compression arm-Fork) (_
eStay (Side cap) (_
oCompression arms (_)
NOTE:
Put mark _ on the compression arms before
removing out so that it can be reinstalled in the
original position.
[] Left [] Right
5. Remove:
_2___ _ ®Cotter pin (_
oBolt (_)
_1_) _ ®Washer (_)
omension arm (_
(_ oWasher (_
-@1
I
6. Remove:
*Ring nuts (Upper and Lower) @
Use the Ring Nut Wrench (YU-012681 or
(YU-33975) (_).
oFront fork assembly (_
NOTE:
Support the front fork not to drop the ball
bearings.
7. Remove:
®Ball race cover (_
oBall race (Upper) (_
oBall bearings (Upper/22 pcs) _)
8. Remove:
_. oBall bearings (Lower/19 pcs) @
J
5-16