Engine Mounting - Yamaha XC200T Service Manual

ENG _1
ENGmNE ASSEMBLY AND ADJUSTMENT
8. Tighten:
_Bolts (Cylinder head cover}
]
BoJt {Cylinder Head Cover):
20 Nm (2.0 m okg, 14 ftolb)
NOYE:
Tighten the bolt in numerical order as shown, in
two or three steps,
ENGINE MOUNTING
When remounting the engine, reverse the removal
procedure.
Note the following points.
1. Instafl:
_Maffler assembly _ with new gasket (_4]
eFJange bolts (Muffler)_2_
eSocket bolts (Exhaust pipe) (._
_ F,angeBo,t(Muff,er) _2_:
25 Nm {2,5 mokg, 18 ftoJb}
Socket Bolt (Exhaust pipe) (_1_:
30Nm (3°0 mokg, _ ftolb)
2. Instatl:
olntake manifold _1_) w ith new O_ring _2_}
..... Moo ,o, 1
2 ft orob)
3. tnstalk
eEngine assembly _0_
To the frame assembly _
ePivot shaft (Engine) _3-_
Grease the pivot shaft surfaceo
eBolt (Shock absorberqower) @
80 Nm (8.0 m kg, 56ftoJb} t
e_l ® :l
50 Nm (5.0 m kg; 36 ftolb)
3-67