Yamaha XC200T Service Manual page 106

ENG NE ASSEMBLY AND ADJUSTMENT
Crankcase
1. Clean:
oCrankcase mating surfaces with a lacquer
thinner.
2. Apply:
®Quick Gasket ® (ACC-11001-.05-01/
To the mating surfaces of both case halves.
3. install:
®Nozzle _![
oO_[ing (New)
o Dowel pins _3-_
®Spacer collar _z_
To the crankcase 1
4. Fit the crankcase 2 onto the crankcase 1. Tap
lightly the crankcase 2 with a soft-head
hammer°
5. Check:
,_Crankshaft smooth movement
Not smooth-_ Reset.
6o Tighten:
_Screws (Crankcase) (_- _-_
NOTE: _ __
Tighten the screws starting with the lowest num-
i bered one, in two or three steps,
®
Screw {Cran
®,
i_ RIGHT
LEFT
3-53