Throttle Cable Adjustment; Idling Speed Adjustment - Yamaha XC200T Service Manual

iDLiNG SPEED ADJUSTMENT/ mNSP]_ I
THROTTLE CABLE ADJUSTMENT
ADJ
iDLiNG SPEED ADJUSTMENT
1. Remove:
o Front cover
Refer to "REMOVING THE COVERS AND
PANELS", page 2-12_.
2. Adjust:
eldle speed
Warm up the engine and turn the throttle
stop screw (_ to adjust.
Use the Inductive Tachometer (YU-08036).
Idle Speed:
1,250 - 1,350 r/rain
IN
3_7 mm
THROTTLE CABLE ADJUSTMENT
(0.12 _0.28 inl NOTE:
Before adjusting the throttle cable free play, the
engine idling speed should be adjusted.
1. Check:
oThrottle cable free play (_
Out of specification-_Adjust.
_ Throttle Cable Free Play @: ]
3-7 rnrn (0.12-0.28 in)
2. Adjust:
oThrottle cable free play
Throttle cable adjustment steps:
eLoosen the adjuster lock nut _).
oTurn the adjuster (_ clockwise or counter-
clockwise until proper free play is attained.
oTighten the adjuster Iocknut (_.
NOTE:
After adjusting, turn the handlebars to right and
left and make sure that the engine idling does
not run faster.
2-4