Inspection; Installation - Yamaha XC200T Service Manual

°EA° S.OOKOO00° [O"AS[ I
INSPECTION
1. Inspect:
oShock absorber rod
Bends/Damage-_ Replace the shock absorb-
er assembly.
®Shock absorber
Oil leakes-_ Replace the shock absorber as-
sembly.
®Spring
Fatigue_Replace the shock absorber as-
sembly.
Move the spring up and down.
INSTALLATION
When installing the rear shock absorber, reverse
the removal procedure. Note the following points.
1. Apply:
eLithium base grease
To the pivot points.
___ 2. Tighten:
eBolt (Shock absorber-Upper) (_
eBolt (Shock absorber-Lower) (_)
.' _ 50 Nm (5.0 rn,kg, 36 ft,lb)
Bolt (Shock Absorber-Lower) (_:
50 Nrn (5.0 mokg, 36 ft°lb)
3. Adjust:
oSpring preload
Refer to "CHAPTER 2. REAR SHOCK AB-
SORBER ADJUSTMENT" section.
5-22