Yamaha XC200T Service Manual page 26

C=..Gm.E oral .EPLACEME.T
4. Inspect:
oGasket (Drain bolt) (1._
®O-dng (Oil filter cover} (_
Damage -+ Replace,
5, Install:
®Oil filter (New)
oOil filter cover
_ Drain bok
NOTE:
olnstall the oil filter 0.} with its projection (_ fac-
ing towards the engine.
®Before installing the oil filter cover, apply the en-
gine oil to the O-ring on the filter cover.
6. Tighten:
Drain bolt
oBolt (Oil filter cover)
Drain Bolt:
43 Nm {4.3 m.kg, 31 ft,lb)
Bolt (Oit Fiffer Cover}:
10 Nm (1.0 m,kg, 7.2 ft,_b)
7. Fill:
oCrankcase
Recommended OiJ:
:30 40 50 60°F At 5°C {40°F) or Higher @:
SAE 20W40 Type SE Motor Oil
{ _ w _,_:) At 15°C {60°F} or Lower _-_2"_:
(.2_-_ _ _ SAE 10W30 Type SE Motor Oil
With OH Filter Replacement:
0 5 IO 15°C 1,1 L (0.97 imp qt, 1.16 US qt)
Do not allow foreign material to enter the
crankcase.
8. Instalk
* Dipstick
9. Inspect:
-Oil leaks
oOil level
®Oil pressure
Refer to "OIL PRESSURE INSPECTION"
2-7 sect{on.