Yamaha XC200T Service Manual page 189

nGNmON SYSTEM
ELEC]
Troubleshooting Chart
i Check the entire ignition for connections" _ I COrrect" I
Measure the battery voltage and specific
0rav,t . i
Battery voltage: More than 12V Recharge the battery.
Specific gravity: 1,280
Set the main and "ENGINE STOP" switches
to "ON", and sidestand to up. Check for vol- __>1Check the main fuse and wiring circuit. ]
. tage (12V) on the "Red/White" lead at the ig- _..............................
nitor unit and ignition coil.
Measure the pickup coil for resistance. NO 4 Replace the pickup coil assembly.
Pickup coil: 114.5f_4-15% at 20°C (68°F
l
(WhiteRed--WhiteBlack)
Check the ignition coil for resistance (primary and secondary).
Primary: 2.7f_+10% at 20°C (68°F) Secondary: 13.2 kf_+20% at 20°C (68°F)
2 7_ 13 2 k_Q
OK NO
TCI unit is faulty, replace the unit. I Replace the ignition coil(s). I
6-28