Table of Contents
Advertisement
52 Heating and air conditioning system ›
Heating and air conditioning
system
Heating
Overview of the heating operation
components
Set the temperature
A
Set the blower speed
B
Set the direction of the air outlet
C
Switch recirculated air mode on/off
WARNING
Danger of misting!
Always keep the fan on.
▶
Manual air conditioning
What you should be mindful of
We recommend keeping the interior temperature
▶
no more than 5 ° C lower than the outdoor tem-
perature.
We recommend switching the cooling system off
▶
about 10 minutes before the end of the journey to
prevent odour formation.
Annual disinfection of the air conditioning is rec-
▶
ommended.
WARNING
Danger of misting!
Always keep the fan on.
▶
WARNING
Risk of accident!
In recirculation mode, there is no fresh air supply
from the outside. This can result in loss of driver at-
tention and fogging up of windows.
Keep the recirculation mode switched on for a
▶
short time only.
Operating conditions for the cooling system
✓ Outside temperature above 2 ° C
✓ Running engine
✓ Fan switched on
Heating
Overview of the controls for the manual air
conditioning
Set the temperature
A
Set the blower speed
B
Set the direction of the air outlet
C
Switch the cooling system on/off
Switch recirculated air mode on/off
Switch on/off the windscreen heat-
ing
» page 54, Operation
Switch the seat heating on/off
ation
Cooling system
When the cooling system is switched on, the tem-
perature and humidity in the vehicle will drop.
Switching on the cooling system prevents the win-
dows from misting up.
After pressing the
in the button illuminates, even if the conditions for
switching on the cooling system are not met. The
cooling system switches on when the conditions for
switching on the cooling system are met.
Automatic activation of the cooling system
Automatic activation of the cooling system prevents
the windows from misting up. The system switches
on in the following cases.
When the fan is on and the air distribution control-
▶
ler is in the
In this case, the recirculation mode is switched off
and cannot be switched on.
When the air distribution controller is not in the
▶
position, and recirculated air mode is switched on.
Recirculated air mode
The recirculation mode prevents contaminated out-
side air getting into the interior of the vehicle.
Briefly switching on recirculation mode can increase
the cooling effect.
Under certain circumstances, the recirculation
mode may be switched on or off automatically.
When the air conditioner is operating, the engine
idle speed may increase automatically.
» page 55, Oper-
button, the indicator light
position.
Advertisement
Table of Contents
