Ametek CSW5550 User Manual page 74

User Manual
VIEWING ANGLE
LANGUAGE
74
ELAPSED TIME The elapsed time screen, when selected from
the UTILITY menu, will appear for about 3 seconds. The
elapsed time shown is the cumulative amount of time the power
source has been on from its initial build. This value is read only
and cannot be changed by the user.
The same screen also displays the internal AC source ambient
temperature in degrees C.
The viewing angle can be used to change the contrast ratio of
the LCD display. The range of the viewing angle parameter is
from -10 to +10. Setting the right viewing angle is matter of
personal taste. Set this parameter to a value that is most
comfortable for the user.
The following choices for this field are: SCPI; The standard bus
syntax for the CSW5550, SW SCPI; The bus syntax to match
the Elgar SW5550 or SW5250.
California Instruments
CSW Series