Ametek CSW5550 User Manual page 19

User Manual
Output Parameter
Current Limit
Range
Resolution
Accuracy
Frequency Range:
(Without Cloc/ Lock
option enabled)
Frequency Accuracy:
DC Offset Voltage:
AC Noise Level:
Output Impedance
(CSW5550 only)
Peak Repetitive Current
Crest Factor:
CSW Series
CSW5550 (multiply current and power by the number of power
sources in multi-source power systems)
Programmable 0 to 100% of range for all ranges
0.01 Arms
± 1% of Range. Add ±1.5%/kHz above 500 Hz
16.00 - 81.91 Hz (0.01 Hz resolution)
81.0 – 819.1 Hz (0.1 Hz resolution)
820 – 5000 Hz (1 Hz resolution)
 0.01% of programmed value
Less than 20 mV with linear load in AC Output Mode.
>60 dB RMS below full output (sine wave, 40 to 500 Hz)
1-phase mode, 312V range- meets requirements of IEC-1000-3-2,
Annex A, Supply Source. Valid for equipment classes A, B, C, and D
52 amps for 156 V range
3.25 (peak output current to RMS output current)
California Instruments
26 amps for 312 V range
19