Use For Intended Purpose; Instruction - Rotax 914 F Maintenance Manual

4.4.1)

Use for intended purpose

-
-
-
-
4.4.2)

Instruction

Engines require instructions regarding their application, use, operation,
maintenance and repair.
Technical documentation and directions are useful and necessary comple-
mentary elements for personal instruction, but can by no means substitute
theoretical and practical instructions. These instructions should cover expla-
nation of the technical context, advice for operation, maintenance, use and
operational safety of the engine.
-
-
■ CAUTION:
Modification no.
- 0 -
The engine ROTAX 914 F is intended for use in certified aircraft. In case
®
of doubt the regulations of the national authorities or the respective
sportive federations have to be observed.
This is a certified aircraft engine tested as per aeronautical standards for
safety and lifetime. It was developed to the latest state of the art and
intensively tested.
Use for intended purpose also means respecting the prescribed opera-
tional- maintenance- and repair conditions. This also increases the en-
gine lifetime.
Never run the engine without propeller, this causes inevitably engine
damage and hazard of explosion.
This engine must only be operated with accessories supplied, recom-
mended and released by ROTAX
consent by the engine manufacturer.
Before longer standstill (longer than 2 months) observe without fail the
instructions for engine "out of use". Protect fuel- and carburetor system
against contamination.
Spare parts must meet with the requirements defined by the
engine manufacturer. This is only warranted by use of
GENUINE ROTAX
spare parts list).
They are available only at the authorized ROTAX
tion- and Service partners.
If using other than GENUINE ROTAX
accessories, any warranty by ROTAX
Warranty Conditions).
Reference
. Modifications are only allowed after
®
spare parts and/or accessories (see
®
spare parts and/or
®
®
Main
1997 02 01
914 F
Distribu-
®
gets void (see
Date Page
17