7) Calibration Of The Throttle Position - Rotax 914 F Maintenance Manual

13.6.1.7) Calibration of the throttle position

See Pic. 173/1, 173/2 and 173/3.
Modification no.
- 3 -
Start up of the sub program THROTTLE.
Check whether the throttle (carb 2/4) can be fully opened and closed.
Verify that the Bowden cables allow the complete travel from stop to stop.
Follow the directives on the display, i.e.:
Close the throttle completely (carb 2/4) and confirm with ENTER.
Fully open the throttle (carb 2/4) and confirm with ENTER.
Calibration data will be transferred automatically and the calibration takes
place.
Verification of the throttle position as per section 13.6.1.6).
Reference
Pic. 173/1
03071
Pic. 173/2
03072
Pic. 173/3
03073
Main Date
914 F 1999 01 01
Page
209