3) Introduction To Employment Of The Communication Program - Rotax 914 F Maintenance Manual

13.6.1.3) Introduction to employment of the communication program

a) Software
b) Necessary connections
See Pic. 156 and 157.
Q
00197
00198
Pic. 156
TCU
00209
Modification no.
- 3 -
The software is the property of BOMBARDIER-ROTAX. Duplication is
only permitted for transmission on a fixed disk or for back up and filing.
On the TCU 966.470 connect the decoding unit (Dongle) on the RS 232,
the 9-pin port of the cable harness.
On the TCU 966.741 connect the computer direct on the RS 232 the 9-pin
port of the cable harness.
Connect data cable of decoding unit (Dongle) with the COM1 interface of
computer.
NOTE: The computer is normally provided with two serial interfaces
Q and W.
Normally a serial interface (usually a 9-pin port) is used for
connection of a mouse.
Since there is no need for a mouse to control the communi-
cation program the Dongle can be connected with the
interface for the mouse, best known as COM 1.
W
Dekodereinheit
(Dongle)
zur TCU
(to TCU)
zur Dekodiereinheit
(to Dongle)
PC
Pic. 157
Reference
zum PC
(to PC)
Laptop
Kommunikationsprogramm
(communicationprogram)
NOTE: On the TCU 966.741 the decod-
ing unit is inapplicable and the
connection is direct.
Main Date
914 F 1999 01 01
Page
197