Use For Intended Purpose - Rotax 914 series Maintenance Manual

3.5)

Use for intended purpose

General note
The engine ROTAX 914 F is intended for use in certified aircraft. In case of
Use
doubt the regulations of the national authorities or the respective sportive
federations have to be observed.
Certified aircraft engine ROTAX 914 F is tested as per aeronautical stan-
Certified engine
dards for safety and time between overhaul. It was developed to conform
to the latest technological standards and rigorously tested.
Engine ROTAX 914 UL is not certified. These engines have not received
Non certified en-
gine any aeronautical standards or regulatory safety or durability testing, and
conform to no aircraft standards. These engines are for use in experimen-
tal, uncertificated aircraft and vehicles only in which an engine failure will
not compromise safety.
NOTES:
The operator assumes all risk of use, and acknowledges by this use that
Engine stop-
page he/she knows this engine is subject to sudden stoppage.
Use for intended purpose also includes observation of the operational,
Maintenance
and repair con-
maintenance and repair conditions prescribed by the manufacturer. This is
ditions
a crucial factor concerning the reliability of the engine and can increase
the durability of the engine.
Effectivity: 914 Series
Edition 2 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Explosion hazard.
WARNING WARNUNG
Bursting off parts can cause serious injuries. Never run
the engine without propeller.
These engines are technically equivalent to certified en-
gines and have been manufactured by BRP-Powertrain us-
ing the same quality assurance system.
00-00-00
page 16
January 01/2010