2) Warning Lights - Rotax 914 F Maintenance Manual

13.6.2.2) Warning lights

See Pic. 175.
The TCU is furnished with output terminals for an external red warning lamp
and an orange caution lamp.
Location of the lamps depends on type of aircraft and is limited by the length
of the wiring harness. Standard location is on the instrument panel.
When switching on the voltage supply of the TCU the function of the two
lamps is automatically checked. For approx. 1 to 2 seconds both lamps light
up and then extinguish. If this should not happen check the following:
Pic. 175
00211
Modification no.
- 0 -
Inspection for physical damage
Verify connection of cable harness
Check warning lamps for function
NOTE: The two warning lamps are not in the supply volume of
engine.
+12V
øV
CAUTION LAMP
ATTENTION: Exchange any part with physical damage or if not operating
correctly, without delay.
Reference
øV
+12V
914 F
Main Date
1997 02 01
Page
211