Use For Intended Purpose - Rotax 912 Series Maintenance Manual

3.5)

Use for intended purpose

General note
Use The engine ROTAX 912 A/F/S is intended for use in certified aircraft. In
case of doubt the regulations of the national authorities or the respective
sportive federations have to be observed.
Certified engine
Certified aircraft engine ROTAX 912 A/F/S is tested as per aeronautical
standards for safety and time between overhaul. It was developed to con-
form to the latest technological standards and rigorously tested.
Non certified en-
Engine ROTAX 912 UL/ULS/ULSFR is not certified. These engines have
gine
not received any aeronautical standards or regulatory safety or durability
testing, and conform to no aircraft standards. These engines are for use in
experimental, uncertificated aircraft and vehicles only in which an engine
failure will not compromise safety.
NOTES:
Engine stop-
The operator assumes all risk of use, and acknowledges by this use that
page
he/she knows this engine is subject to sudden stoppage.
Maintenance Use for intended purpose also includes observation of the operational,
and repair con-
maintenance and repair conditions prescribed by the manufacturer. This is
ditions
a crucial factor concerning the reliability of the engine and can increase
the durability of the engine.
Effectivity: 912 Series
Edition 3 / Rev. 0
BRP-Powertrain
MAINTENANCE MANUAL
Explosion hazard.
WARNING WARNUNG
Bursting off parts can cause serious injuries. Never run
the engine without propeller.
These engines are technically equivalent to certified en-
gines and have been manufactured by BRP-Powertrain us-
ing the same quality assurance system.
00-00-00
page 16
September 01/2012