Advertisement
0$,17(1$1&(
8VHU·V 0DQXDO
0LUDJH
G
$'-867 7+( =220
Face the front of
5,1*
the projector. On the
lens, manually turn its
textured zoom ring
counter-clockwise as far
as possible. Then reverse
direction by
approximately ½ inch.
See right.
Remove the lens cap. Plug in the projector and power up.
H
I
$'-867 7+( $'$37(5 &2//$5
Then adjust as follows (see Figure 4.12):
N
Adjust "Zoom" to its maximum, watching the adapter as you hold the
key down. The adapter collar will turn counter-clockwise as far as
possible and then automatically back off (reverse a slight distance) when
it has reached its maximum.
N
Briefly decrease "Zoom" to continue this back-off by another ¼ inch.
Watch the collar movement carefully as you press
to mark reference points first.
)LJXUH $GMXVW DGDSWHU FROODU XVLQJ ´=RRPµ FRQWURO
0DNH VXUH WR WXUQ ERWK WKH OHQV ]RRP ULQJ
DQG DGDSWHU FROODU DV GHVFULEHG
Gradually tighten the 3 thumbscrews equally, taking care to keep the adapter
J
collar and lens centered with one another (Figure 4.13). The adapter collar
should be securely attached to the lens when you are done, enabling the lens to
/HQV
move with
adjustments.
/HQV
Press
to display the Lens Control menu.
,03257$17
. You may want
Advertisement
