Advertisement
functions are disabled. To leave standby press and hold
Or simply press
0HQX
0HQX
Press
0HQX
to display the Main menu. A list of several options appears for access to
specific functions, such as Channel Setup or Image Settings. Press
remove all menus and return to presentation level.
(QWHU
(QWHU
(QWHU
Press
to select a highlighted item, to toggle a checkbox (checked vs. unchecked),
or to accept a parameter adjustment and return to the previous menu or image.
([LW
([LW
Press
([LW
to return to the previous level, such as the previous menu.
NOTE:
([LW
does not save changes within text editing boxes (including number
editing of a slidebars) or within pull-down lists. It acts as a "cancel" in these cases.
$UURZ .H\V
The arrow keys have a variety of functions depending on the situation. Some typical
uses are described below. See also Editing Text later in Section 3.
N
Use
or
adjustment (note the adjustment increments and range depend on the
parameter being adjusted).
N
Use
or
without having to display the list first
N
Use
or
down lists.
21
Use the
21
or
or
increase or decrease the value in the second (bottom) slidebar of a double slidebar.
2))
You can also use
including an asterisk symbol—to ensure a toggle only in the desired direction. When
turning the projector on, for instance, you may be too far from the projector to know
whether it is really off or if the shutter is merely closed. If you press
for approximately 1 second in hopes of turning the projector on, the projector will
actually turn off if the projector was already on. Instead, to avoid the risk of toggling
in the wrong direction, quickly press and release normally the function key you wish
to toggle (in this case
or
2))
as desired. The specific toggle will occur.
Toggle keys are labeled with an asterisk on the keypad. They are listed below:
N
6KXWWHU
6KXWWHU
N
6WE\
6WE\
N
3RZHU
3RZHU
([LW
or
0HQX
.
to change a slidebar value—hold as desired for continuous
to change to a different option within a pull-down list
to jump between "pages", such as in Help or lengthy pull-
2))
keys to navigate within a menu, pull-down list or text box, or to
21
or
2))
in conjunction with certain toggle keys—i.e., those
3RZHU
). Then immediately (within 2 seconds) press either
+
21
= close the shutter
+
2))
= open the shutter
+
21
= put the projector in standby mode
+
2))
= leave standby
+
21
= turn the projector on
+
2))
= turn the projector off
23(5$7,21
6WE\
again (or use
6WE\
0HQX
again to
3RZHU
and hold it
8VHU·V 0DQXDO
0LUDJH
2))
).
21
Advertisement
