Download Print this page

Mirage 10000 User Manual page 76

Advertisement

23(5$7,21
8VHU·V 0DQXDO

0LUDJH 
Use
&+$1*( /$03
to record the serial
number for a newly
installed lamp.
In the Lamp S/N
window, use the
number text entry
keys to record the
new lamp serial
number, and press
again to accept
the change. See
Using Slidebars and Other Controls if you need help entering the number. Once
entered, the new lamp serial number will be added to the Lamp History menu and the
Lamp Hours timer will reset to "0". Lamp Mode and Lamp Limit remain as they were
for the previous lamp, and can be changed at any time.
NOTE: Enter a serial number only if you have just installed a new lamp. This will
help ensure that lamp timer is not reset on an old lamp and that the number of hours
logged on the lamp will be accurate.
6HUYLFH
The Service submenu is also accessed through the Advanced menu, but it is
password-protected and intended for use by qualified service technicians only.
&DOLEUDWH /HQV
Select "Calibrate Lens" to ensure that the mid-point for each of the four lens
functions is defined as such in software, and that the lens mount movements remain
accurate to this reference. Regular calibration can correct for slight eventual
mechanical "drifting" of lens mount movements over time. It is particularly
recommended whenever the projector is bumped or subjected to vibration, and it is
required after certain service procedures.
During calibration, the lens mount will move in various directions for approximately
20 minutes, and a small "Lens Calibrating" message will appear on screen.
Calibrating an empty lens mount (i.e., no lens or collar) ensures that nothing can
bump into the optics during the process. Calibration is complete when lens mount
movement stops—the sound of the motors will permanently cease. The Advanced
menu then reappears on screen.
This read-only menu lists a variety of details about the standard and optional
6WDWXV
components currently in use on the projector. Refer to the Status menu for versions of
hardware (left side) and software (right side) installed, the number of lamp hours
logged in total and for a specific period (such as a rental period), and for your
)LJXUH  5HFRUGLQJ WKH 1HZ /DPS 6HULDO 1XPEHU
,03257$17
$OZD\V '2 UHFRUG WKH VHULDO QXPEHU RI D 1(: ODPS
,03257$17
,W LV UHFRPPHQGHG WKDW \RX
5(029( 7+( /(16 EHIRUH FDOLEUDWLRQ

Advertisement

loading