Advertisement
*/266$5<
&KHFNER[
&RORU 6KLIW
&RORU 7HPSHUDWXUH
&RPSRQHQW 9LGHR
&RPSRVLWH 9LGHR
&RQWUDVW UDWLR
&RQYHUJHQFH
&XUYHG 6FUHHQ
'0'
'HFRGHU
'LIIXVHG 6FUHHQ
'LVSOD\ 6HWWLQJ
)OLFNHU
)UDPH 5DWH
)RRWFDQGOH
)RRWODPEHUW
*DLQ RU 6FUHHQ *DLQ
0LUDJH 8VHU·V 0DQXDO
$
A menu item that indicates whether an option is currently in effect (checked) or not
(unchecked).
A change in the tint of a white field across an image.
The coloration (reddish, white, bluish, greenish, etc.) of white in an image, measured
using the Kelvin (degrees K) temperature scale. Higher temperatures output more
light.
See YCbCr or YPbPr.
The output of video tape players and some computers, characterized by
synchronization, luminance and color signals combined on one output cable.
The degree of difference between the lightest and darkest areas of the image.
The alignment of the red, green, and blue elements of a projected image.
A projection screen which is slightly concave for improved screen gain. Curved
screens usually have screen gains which are greater than 1 but viewing angles much
less than 180
'',
A Direct Digital Interface signal can be supplied to the projector via an optional
digital input module installed in
259M signal using a Serial Digital Input Module or input an SMPTE-272M signal
from a Digital HDTV Module).
_ _
Digital Micromirror Devices
blue color data.
Located at
PAL-N, PAL-M, or SECAM to RGB video.
'HWDLO
The sharpness of a display from a video source.
A type of rear-projection screen which spreads the light striking it. Screen gain is less
than 1 but audience viewing angles are increased.
An adjustment that affects the display of an image. Such display settings include
contrast, brightness, tint, blanking, size, offsets, and others.
A very rapid variation in image brightness caused by a frame rate that is too slow.
(See Interlace.)
The frequency at which complete images are generated. For non-interlaced signals,
the frame rate is identical to the vertical frequency. For interlaced signals, the frame
rate (also known as field rate) is one half of vertical frequency.
The intensity of visible light per square foot.
The luminance (brightness) which results from one foot-candle of illumination falling
on a perfectly diffuse surface.
The ability of a screen to direct incident light to an audience. A flat matte white wall
has a gain of approximately 1. Screens with gain less than 1 attenuate incident light;
°
. Curved screens are not recommended for use with this projector.
,1387
_
used in this projector for processing red, green, and
,1387
,1387
and
, this device converts NTSC 3.58, NTSC 4.4, PAL,
. For example, you can input an SMPTE-
Advertisement
