Advertisement
'HWDLO
Press
6+257 &87
"Detail" adjusts the sharpness of the video image. Use
is as sharp as possible, keeping in mind that any level of detail above 3 (default) will
increase the level of detail as well as introduce some level of noise in the image. Set
below 3 to filter the signal and remove noise from a noisy source. Keep at 3 to apply
no detail.
&RORU 7HPS
"Color Temp" applies either a preset color temperature (3200K, 5400K, 6500K,
9300K) or any previously defined Interpolated or custom "User" color temperature.
All temperatures are measured in degrees Kelvin and represent
the "coloration" (reddish or bluish) of the whites displayed by
the projector—the lower the temperature, the more reddish the
whites, the higher the temperature, the more bluish the whites.
NOTE: Custom temperatures ("User" or "Interpolated") can
be defined in the Advanced Color Temperature menu–until
then, these choices all default to 6500K. See Section 3.8,
Adjusting System Parameters and Advanced Controls.
&RORU 6SDFH
This option determines how the color components of an input signal are decoded for
accurate color in the display. Selecting a color space option is useful only for analog
signals connected to
,1387
usually determined automatically by the projector, in some circumstances you may
wish to override this and manually set a different color space.
NOTE: For digital signals or for signals connected to
space function is entirely automatic and the pull-down list disabled.
The current color space appears in the Image Settings menu. Press
different option:
N
Select
5*%
N
Select
<3E3U 9LGHR
N
Select
<3E3U +'79
NOTE: When certain RGB signals are first connected, the projector may not initially
recognize them as RGB and will incorrectly decode their color information as YPbPr
(video). These signals can include:
N
RGB signals in NTSC, PAL, SECAM frequency ranges
N
Scan-doubled sync-on-green
N
Scan-quadrupled sync-on-green
For these signals, change the Color Space to RGB, then define a new channel for
future use.
an
d adjust the slidebar.)
or
Although the color space for such a signal is
,1387
unless you are using component video at
with a standard definition televised signal (SDTV)
with a high definition televised signal (HDTV).
23(5$7,21
or
until the display
or
, the color
,1387
,1387
to select a
or
,1387
8VHU·V 0DQXDO
0LUDJH
Advertisement
