Advertisement
&RPSRVLWH 69LGHR
,QSXW 0RGXOH
[[
3& $QDORJ
,QSXW 0RGXOH
[[
The Composite/S-Video Input Module may be installed in this projector, a Marquee
Signal Switcher or a Marquee Case/Power Supply. The module receives either
composite video or S-video input signals from tape or disk players (do not connect
both types of signals simultaneously). Video inputs are 75
outputs are provided for buffered loop-through to another display device.
)HDWXUHV
¡
BNC connectors for composite RGB signals
¡
4-pin mini-DIN connectors for S-Video signals
¡
buffered loop-through video outputs
NOTES: 1) This interface is not a decoder. NTSC, PAL, or SECAM signals must
connect to the video decoder installed at
are not functional. Connect audio to an external audio system. 3) In this projector, do
not connect both composite video and S-video signals to the Composite / S-Video
Input Module–connect one or the other, even when plugged into a switcher.
The PC250 Analog Input Module may be installed in this projector, a Marquee
Signal Switcher or a Marquee Case/Power Supply. The module receives analog RGB
input signals from IBM PC compatibles or Macintosh computers. Video inputs are
$
75
terminated. Video outputs are provided for buffered loop-through to another
display device.
)HDWXUHV
¡
accepts VGA or MAC RGB video
¡
15 pin D connectors for video
¡
active loop-through video outputs
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 2)
The audio connectors are not functional. Connect audio to an external audio system.
3) Trademarks are the rights of their respective owners.
237,21$/ ,1387 02'8/(6
$
terminated. Video
,1387
,1387
/
. 2) The audio connectors
0LUDJH 8VHU·V 0DQXDO
)
Advertisement
