,167$//$7,21 $1' 6(783
,I XVLQJ PXOWLSOH SURMHFWRUV
8VHU·V 0DQXDO
0LUDJH
and connect an RS-232 serial communication cable between the switcher and
,1387
the projector serial port labeled
communication link (permanently set at 9600 baud) enables you to access inputs
connected to the switcher in the same manner as those connected directly to the
projector. For most other third-party switchers, connect and access sources according
to the documentation provided with that switcher.
NOTE: See 2.4, Source Connections, "Connecting a Switcher" for complete details.
6HULDO &RPPXQLFDWLRQV
: To control multiple projectors with a computer/controller having
56 1(7:25.
an RS-232 interface, first set them all to the same baud rate needed, then chain the
projectors together by connecting the
(already connected to the computer/controller) to the
projector in the chain.
)LJXUH $GGLQJ $QRWKHU 3URMHFWRU YLD 56
: To control multiple projectors with a computer/controller having
56 1(7:25.
an RS-422 interface, first set them all to the same baud rate needed, then chain the
projectors together by connecting the
(already connected to the computer/controller) to the
next projector in the chain.
)LJXUH $GGLQJ $QRWKHU 3URMHFWRU YLD 56
(refer back to Figure 2.22). The switcher
6:,7&+(5
connector of the first projector
56 287
56 ,1
connector of the first projector
56 3257
56 3257
connector of the next
connector of the