Advertisement
6HULDO 'LJLWDO ,QSXW 0RGXOH
[[
0DUTXHH
&DVH3RZHU 6XSSO\
[[
[[
The Serial Digital Input Module (SDI) can be installed in the projector at
where it accepts a serial digital 4:2:2 component video signal (YCbCr) via a single
6(5,$/ ,1
BNC connector. The signal can loop through the
another device (such as another projector). Inputs are 75
)HDWXUHV
¡
accepts serial digital 4:2:2 component video (YCbCr)
¡
provides both a
¡
includes status LEDs for signal and error
NOTE: Connect audio to an external audio system.
The Marquee Case/Power Supply enables you to use an analog input module as a
stand-alone interface. Two supplies are available: one for use with 120 volt line
voltage (38-801023-XX), and the other for use with 220 volt line voltage
(38-801026-XX). Both models include a 15 Vdc, 500 mA AC adapter.
)HDWXUHV
¡
easy installation — no tools required
¡
the Marquee Case/Power Supply accepts the following input modules for
use with this projector: RBG500, RGB400 Active Loop-Thru, RGB400
Buffered Amplifier, Composite/S-Video, and PC Analog. Digital inputs
cannot be used.
¡
retaining clip to secure AC adapter
¡
non-slip feet
¡
supplied with 110 or 220 volt AC adapter
6(5,$/ ,1
6(5,$/ 287
and a
237,21$/ ,1387 02'8/(6
,1387
6(5,$/ 287
BNC out to
$
terminated.
BNC connector
0LUDJH 8VHU·V 0DQXDO
,
)
Advertisement
