Advertisement
1DYLJDWLQJWKH
0HQXV
NOTES: 1) With OSD on, you can still hide menus, error messages, slidebars, etc.
with the appropriate setting in the Preferences menu. 2) The status of the
displayed in the LCD window at the rear of the projector.
+HOS
+HOS
Press
+HOS
for detailed information about any current menu and highlight. Press
again to exit. From presentation level, press
consisting of Using Help, Setup, Keys, Source (Input) Selection, Stat/Pwr LEDs and
Using 3D. Press
7HVW
7HVW
7HVW
Press
to display one of the several available test patterns. Press
display the next available pattern in the sequence.
or press
([LW
at any time to remove the current test pattern from the screen and return
to presentation level.
NOTE: For a complete list of all test patterns, see the Advanced menu description
later in Section 3.
.H\SDG RSHUDWLQJ VHWWLQJV SURWRFROV
The remote keypad and the optional wired keypad both store keypad operating
settings (called protocols) in memory. In some advanced applications, such as when
you want to use two separate keypads to control two projectors independently, you
may want to override the original protocol set at manufacture (which is "A or B") for
one of the keypads. See section 2.10, Keypad Protocols and Conversion for complete
instructions.
Most of the controls for the projector are
accessed from within the projector's menu
system. There are several groups of related
functions, with each group selectable from the
Main menu as shown at right. Press
time to display the Main menu.
On the keypad, either enter the number
corresponding to the function menu you wish
to access, such as
menu, or use the
desired option and press
menu you selected will then appear. If you select "Auto Setup", this will not activate
a separate function menu but rather begin an automated process of optimizing critical
display parameters such as size, position, pixel tracking, etc., for the current source.
Once you have a function menu displayed, navigate in a similar manner—enter a
menu option number for any numbered option, or use
(QWHU
and press
at the desired option. Extra long menus have a scroll bar on the right–
use the arrow keys to access the remainder of the menu. Locked items or items that
do not pertain to the current action appear dimmed and cannot be selected.
([LW
to leave General Help and return to presentation level.
0HQX
for the Image Settings
keys to highlight the
(QWHU
. The function
+HOS
to access the General Help menu
7HVW
will exit after the last pattern,
at any
)LJXUH 0DLQ 0HQX
to move the highlight
0LUDJH
23(5$7,21
26'
key is
+HOS
7HVW
again to
8VHU·V 0DQXDO
Advertisement
