Advertisement
23(5$7,21
8VHU·V 0DQXDO
0LUDJH
NOTE: Keystone is enabled for a source
only if Size is
1000 and Size
Stretch is
1,000,000.
Generally, set at 50 (default) to apply no
keystone—if your projector is positioned
with its lens surface parallel to the
screen, images will be rectangular. If
images are too narrow at the bottom,
increase keystone. If images are too
narrow at the top, reduce keystone.
The keystone control may be limited when Size is just slightly greater than 1000. In
general, work with image size, stretch and keystone controls as necessary for your
application.
/DQJXDJH
Choose to display menus and help text in English, French, German, Italian or
Spanish. You must exit and re-enter the menu system to implement a change.
'LVSOD\ &KDQQHO /LVW
Enter a checkmark if you want to see a scrollable channel list whenever you press
&KDQ
from your presentation (note that each channel to be included in the list must
also be tagged in the "In Menu" checkbox in the Channel Setup menu). This option
also enables on-screen feedback when using the
channel list and input dialog box while switching channels and sources during a
presentation, do not enter a checkmark.
NOTE: The Channel List and input dialog box cannot be hidden when a menu is
displayed.
'LVSOD\ 6OLGHEDUV
Enter a checkmark to superimpose a small slidebar over the current image when an
adjustable parameter is selected directly with a key (the option does not affect
slidebars in menus). These "direct" slidebars include volume, contrast, brightness,
position, pixel tracking and phase, and others. If "Display Slidebars" is unchecked,
these slidebars will be hidden during adjustment.
'LVSOD\ (UURU 0HVVDJHV
Choose in what way you want to be notified of errors detected in either the incoming
signal or projector. Select "Screen" or "All" if you want a brief message displayed. If
you prefer to be notified via a serial communication only (RS-232 or RS-422), select
"RS232" instead. To disable error messages entirely (except invalid user entries),
select "Off".
NOTE: Display of invalid user entries cannot be disabled, even if you choose "Off".
$XWR 3RZHU 8S
Enter a checkmark to enable the projector to automatically power up after losing
power due to unplugging or a power failure. Note that unsaved display adjustments
may be lost.
Vertical
[
,QSXW
key. If you prefer to hide the
Advertisement
