Advertisement
$GMXVWLQJWKH
,PDJH
$XWR 6HWXS
$872 6285&(
N
locate this channel when an incoming input signal matches. If not
checked, the projector can locate the selected channel only when it is
directly selected via
not result in a channel change.
N
35(9,286 &+$11(/
settings for the previous channel in the Channel Setup list.
N
1(;7 &+$11(/
for the next channel in the Channel Setup list.
Most options for image adjustments can be accessed through two menus: Size and
0HQX
Position (
) and Image Settings (
menu. While in either of these two menus, you can change settings affecting the
image from the current channel by working with the appropriate slidebars,
checkboxes and pull-down lists.
the presentation, if from the Main menu) and accept any changes you may have
made.
From your presentation, you can access any of the individual options in these menus
0HQX
by pressing
followed by the appropriate two-digit number representing their
location in the menu system. For example, press
"color temp" option in the Image Settings menu.
Note that for certain options, you may prefer to use a "direct key" from presentation
level to go directly to a particular option rather than traveling through the menu
system at all (note: this is not available for all display parameters). For example,
&RQW
press
to access the "contrast" slidebar immediately. Press
presentation.
NOTE: 1) To hide the "direct" slidebars only, make sure the Display Slidebars
option in the Preferences menu is unchecked. 2) To hide the entire menu system
from view, toggle the on-screen display OFF: press and hold the
If you want the projector to quickly set up the image for you, select "Auto Setup"
from the Main menu. A confirmation box will ask if you really want to continue, in
which case display parameters listed in Table 3.2 below will be set for you. An "Auto
Setup" can save time in setting up an image, and you can also make further
adjustments as desired. You must have an unlocked channel present to use Auto Setup.
237,0,=(6
3L[HO 7UDFNLQJ
3L[HO 3KDVH
6L]H
9HUWLFDO 6WUHWFK
3RVLWLRQ
,QSXW /HYHOV
If checked, (default), the projector can automatically
&KDQ
on the keypad—and a change in input signal will
Select this option to see or change Channel Edit
Select this option to see or change Channel Edit settings
0HQX
), both of which are listed in the Main
([LW
will always return to the previous menu (or to
0HQX
7DEOH $XWR 6HWXS
:KDW DQ ´$XWR 6HWXSµ 'RHV
6(76 72 '()$8/7
&RQWUDVW %ULJKWQHVV
$XWR ,QSXW /HYHO RII
%ODQNLQJ
'HWDLO
LI YLGHR VRXUFH
)LOWHU
/XPD 'HOD\
23(5$7,21
to quickly access the
([LW
to return to your
26'
key.
8VHU·V 0DQXDO
0LUDJH
Advertisement
