Advertisement
5*% 6LJQDOV
,1387
connection would be to an RGB source such as VGA, SVGA, XGA, Mac,
PowerMac, DEC, Sun, SGI and others. This projector supports multiple sync types
with RGB signals: sync-on-green, composite sync, and separate H & V syncs. This
input must be used for 3D displays.
NOTE: Depending on the source, you may need a custom adapter cable with BNC
connectors at the projector end and a different type of connector at the other (such as
a 15-pin "D" connector for computer sources). Contact your dealer.
Connect the
outputs to the
sync-on-green, only the red, green, and blue connections are required. If the source
provides a composite sync output, connect it to the
the source provides separate horizontal and vertical sync outputs, connect horizontal
sync to the
labeled
NOTES: 1) If for some reason the projector fails to recognize a signal as an RGB
signal, specify this Color Space option within the Image Settings menu. See 3.6,
Adjusting the Image. 2) To connect YPbPr signals–such as from DVD or analog HDTV
sources–to
in this section.
provides 5 BNCs (connectors) for linking to a variety of sources. The typical
BNC input(s) first. Then connect the red, green and blue source
6<1&
,
, and
5('
*5((1
input labeled
6<1&
See Figure 2.15.
9(57
, use the red, green and blue BNCs as described in YPbPr Signals later
,1387
)LJXUH &RQQHFWLQJ 5*% ,QSXW
BNCs on the
%/8(
,1387
6<1&
and connect vertical sync to
+25&203
0LUDJH
,167$//$7,21 6(783
panel. If the source uses
input labeled
+25&203
input
6<1&
8VHU·V 0DQXDO
. If
Advertisement
