Advertisement
237,21$/ ,1387 02'8/(6
5*%%$ ,QSXW 0RGXOH
[[
5*% $FWLYH /RRS7KUX
,QSXW 0RGXOH
[[
0LUDJH 8VHU·V 0DQXDO
)
)HDWXUHV
¡
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync), up to 500 MHz bandwidth
¡
BNC connectors for RGB signal inputs
NOTE: The audio connectors are not functional. Connect audio to an external audio
system.
The RGB400 Buffered Amplifier Input Module may be installed in a Marquee Signal
Switcher or a Marquee Case/Power Supply. Connect three-, four-, or five-wire RGB
video signals of up to 400 MHz bandwidth, signals typically produced by high-
resolution computer or workstations. The buffering capability of the module enables
the incoming signal to be sent to a remote destination. Inputs are 75
)HDWXUHV
¡
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
¡
BNC connectors for RGB signal inputs
¡
Buffered signals to a remote destination
NOTE: The audio connectors are not functional. Connect audio to an external audio
system.
The RGB400 ALT Input Module may be installed in this projector, a Marquee Signal
Switcher, or a Marquee Case/Power Supply. The module receives analog RGB input
signals from computers or other RGB source devices. Video inputs are 75
terminated. Video outputs provide buffered loop-through to another display device.
)HDWXUHV
¡
accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or
separate horizontal and vertical sync)
¡
BNC connectors for RGB signal inputs
¡
buffered loop-through video outputs
NOTE: The audio connectors are not functional. Connect audio to an external audio
system.
$
terminated.
$
Advertisement
