Advertisement
23(5$7,21
8VHU·V 0DQXDO
0LUDJH
selected from either the Image Settings menu or the Advanced Color Temperature
menu as usual. You can re-define a "User" color temperature at any time using the
Advanced Color Temperature menu.
Select which color or colors you want to see, useful while working
&2/25 (1$%/( ²
with color temperature white levels.
Use this option to replace the currently selected "User" color
&23< )520 ²
temperature setup with that of another. This function can be particularly useful for
creating a starting point for a new "User" color or for accessing an unaltered factory
default. It is disabled for all color temperatures except "User". See Figure 3.21.
To create a starting point: To set a starting point for a new custom user color
temperature, select a user temperature, then highlight "Copy From" and select a
temperature that is similar to what you want. Adjust white levels from there as
desired.
To use a factory default: The preset color temperature setups (3200K, 5400K,
6500K and 9300K) can be altered from within the password-protected Service
menu only—note that although such an
alteration changes the setup and
appearance for a preset, it does not
change its name. If you suspect that you
are using a preset temperature that has
been altered and you want instead to use
the original factory-calibrated color
temperature without clearing the entire
projector memory, you can use the
"Copy From" option in the Advanced
Color Temperature menu to set up a
"User" temperature with settings from a
permanent factory preset:
1. Select the "User" color temperature
you wish to update at the top of the Advanced Color Temperature menu, such
as "User 2".
)LJXUH ´&RS\ )URPµ
)LJXUH 3UHVHWV DQG
´)DFWRU\µ 3UHVHWV
Advertisement
