Advertisement
23(5$7,21
8VHU·V 0DQXDO
0LUDJH
,17(//,*(17 /(16 6<67(0
positions—focus, zoom, horizontal and vertical offset—to the current channel
settings recorded in projector memory (see 3.5, Using Inputs and Channels if you are
unfamiliar with channels). This feature is particularly useful if you are using sources
with radically different aspect ratios, such as anamorphic vs. 5:4. When switching to
and from such displays, for example, the lens will automatically move to the last
position defined for each channel, automatically optimizing the display for focus,
zoom and offsets. Delete the checkmark if you want to use consistent zoom, focus
and offset settings for all channels—the lens will not move unless you re-adjust a
lens setting.
6KXWWHU
6KXWWHU
Press and hold
with a single key press (this also blanks the image electronically). Or quickly press
6KXWWHU
and release
the correct toggle (useful if you are unsure of the present status). Close the shutter
whenever you want to mute all display yet maintain access to projector functions.
Open the shutter to regain the display.
NOTES: 1) The status of the shutter is shown in the LCD window on the rear panel of
the projector. 2) Upon power-up, the shutter is open. 3) The lamp remains on.
0XWH
0XWH
Use
0XWH
to temporarily hide the current menu—press and hold for approximately 1
second to toggle the menu on or off with a single key press. Or quickly press and
0XWH
release
and follow immediately with
correct toggle (useful if you are unsure of the present status).
)XQF
)XQFWLRQ .H\
From presentation level, press
color or colors in the display. For example,
data,
)XQF
shown below and also appears on the back of the IR remote keypad. Color enabling
can also be accessed in various locations within the menu system.
NOTE: Once
)XQF
non-numeric entry until 2 digits have been entered or 5 seconds have elapsed.
Use of the
)XQF
elsewhere in Section 3. For example, press
deletion or copying of a channel.
26'
26' 2QVFUHHQ GLVSOD\
Press and hold
visible or invisible). Or press
guarantee the correct toggle direction (useful if you are unsure of the present status).
Note that invisible menus are fully functional.
Enable "Intelligent Lens System" to add the 4 lens
6KXWWHU
for approximately 1 second to toggle the shutter closed or open
and follow immediately with
)XQF
followed by a 2-digit number to enable a specific
will display all colors data. The list of available color combinations is
)XQF
= Red
)XQF
= Green
)XQF
= Blue
)XQF
= Red and Green
)XQF
= Green and Blue
)XQF
= Red and Blue
)XQF
= All colors (
is pressed in presentation level, the projector will not respond to
key within the menu system is noted with the appropriate topic
26'
for approximately 1 second to toggle menus on or off (i.e.,
26'
followed immediately by
21
or
2))
if you want to guarantee
21
or
2))
if you want to guarantee the
)XQF
will display only red and green
([LW
does the same thing)
)XQF
in the Channel Setup menu to enable
21
or
2))
to
Advertisement
