Advertisement
23(5$7,21
%URDGFDVW .H\V
Enter a checkmark if you want keypad commands sent to one projector to be relayed
to all projectors in a network. Note the
key will temporarily "override" the
effect of a broadcast setting and allow you to control a specific projector when
necessary.
3URMHFWRU
Enter a three-digit number (such as "001") to assign or change a number to the
projector currently in use–if the current projector already has a number assigned, that
number will appear here. Numerical
identity for projectors is required whenever
you want to communicate with a single
projector within a multiple-projector
application (see
key description in
3.3, Using the Keypad). If you make a
mistake in assigning or changing the
([LW
projector number, press
to cancel.
For complete information about controlling
multiple projectors, see Section 3.9.
3UHIHUHQFHV
Use Preferences checkboxes and pull-down lists to alter how the projector responds
to commands and displays its parameters. Refer to the "Using Slidebars and Other
Controls" subsection if you need help. Changes made to the Preferences menu will be
saved when you exit the menu.
)LJXUH 3UHIHUHQFHV 0HQX
,PDJH 2ULHQWDWLRQ
Choose from Front, Rear, Inverted Front, Inverted Rear according to your
installation. If the setting is incorrect, the image will be reversed and/or upside down.
See 2.6, Operating Orientation for an illustrated explanation.
.H\VWRQH
NOTE: Not available with 3D images processed with "Minimum Delay".
Adjust the keystone control if Mirage 10000 images appear keystoned in shape—that
is, smaller at either the top or bottom rather than rectangular. The effect of keystone
adjustment is similar to physically tilting the projector up or down in relation to the
screen, and it affects all sources.
8VHU·V 0DQXDO
0LUDJH
Advertisement
