Backup Roller Holder Assy - OKIDATA ML320 Turbo Service Manual

Page: 34
Service Guide ML320/321Turbo
Chapter 3 Parts Replacement

3.3.10 Backup Roller Holder Assy

(1) Remove the upper cover (see 3.3.4).
(2) Remove the printhead (see 3.3.1).
(3) Remove the carriage Assy (see 3.3.5 (3)).
(4) Remove the backup roller spring 2.
Disengage claws of roller holder from the carriage frame 1 (2 places), and remove thebackup roller holder
assy 3.
(6) To install, follow the removal steps in reverse order.
Note: Small round hole with metal tip on back of roller holder assy 3 should be facingup when installing.
Copyright 1997, Okidata, Division of OKI America, Inc. All rights reserved. See the OKIDATA Business
Partner Exchange (BPX) for any updates to this material. (http://bpx.okidata.com)